HOLZMANN MASCHINEN TK305 Manual De Intrucciones página 42

19 TROUBLE SHOOTING
Danger due to electrical voltage! Manipulating the machine with the power supply
up can lead to serious injuries or death. Always disconnect the machine from the
power supply before carrying out any troubleshooting work!
Many possible sources of error can be excluded in advance if the machine is properly connected
to the mains.
If you are unable to carry out necessary repairs properly and/or do not have the required
training, always consult a specialist to correct/solve the problem!
Trouble
Motor does not run
Workpiece kick-back
Blade does not reach the
necessary speed
Machine vibrates heavily
HOLZMANN MASCHINEN GmbH
W A R N I N G
Possible cause
 ON-OFF-switch defect
 Motor defect
 No power supply
 Fuse or protection defect
 Extention cord damaged
 Dull saw blade
 Wrong assembled saw blade
 Extention cord to long
 Weak power grid
 Uneven surface
 Motor mount loose
www.holzmann-maschinen.at
TROUBLE SHOOTING
Solution
 Repair switch
 Exchange motor
 Connect to mains
 Change fuse
 Activate protection
 Change
 Replace saw blade
 Check direction / assemble
 Change
 Contact power suppliers
 Reconstitute
 Fix motor mount
42
TK 305