Hazet-Werk 9048 P-2/3 Manual De Instrucciones página 15

3. Dangers that may arise
from the tool
Before each use, check the HAZET tool for full
functionality. Do not use the tool if its functio-
nal efficiency cannot be ensured or if damage
is detected. If you use the tool despite full
functionality not being guaranteed, this poses
a risk of serious injury, health problems and
material damage.
• Never use tools with a defective on/off
switch. Any tools that cannot be switched on
or off with the On/Off switch are dangerous
and must be repaired.
• All service or repair work must be carried out
by qualified personnel only. Only use original
spare parts so as to guarantee its long-term
operational safety.
• Safety devices and/or cover parts may not
be removed.
• Never operate the tool when a protective
cover is missing or when not all of the safety
devices are fitted and in perfect working
order.
• For safety reasons, any modification to
HAZET tools is strictly forbidden. Any modi-
fication of the tool will result in immediate
exclusion from express or implied warranty
and liability.
; Güldenwerther Bahnhofstraße 25 - 29 • 42857 Remscheid • GERMANY
[ +49 (0) 21 91 / 7 92-0 • \ +49 (0) 21 91 / 7 92-375 • ^ hazet.de • ] info@hazet.de
2
For your safety
HAZET-WERK Hermann Zerver GmbH & Co. KG
Always wear personal protective equipment!
Wear working gloves and safety
glasses.
Pneumatic tools can disperse chips,
dust and other abraded particles
at high speed which may result in
severe eye injuries. Compressed
air is dangerous. The air flow may
cause harm to sensitive parts of the
body like eyes, ears, etc. Dust and
objects being raised by the air flow
may cause injuries.
Wear hearing protection.
Long exposure to the working noise
of pneumatic tools may result in per-
manent hearing loss.
Wear a face mask or breathing
protection.
Breathing in the vapours of some
materials like adhesives and chemi-
cals containing tar can, over a pro-
longed period, cause serious harm.
Wear tight-fitting protective
clothing.
Tools with moving parts can get
caught in your hair, clothes, jewel-
lery or other loose objects, which
can lead to serious injury. Never
wear clothing that is too loose and/
or clothing with bands or loops, etc.
which may get caught in the moving
parts of the tool. During the work,
take off jewellery, watches, identi-
fication tags, bracelets, necklaces,
etc. that could get caught in the
tool. Never touch the moving parts
of a tool. Long hair should be tied
back or covered.
Keep children away from pneumatic tools.
Unattended tools or tools that are connected
to the compressed air supply may be used by
unauthorised persons and could cause injury to
them or to other persons.
15