Hazet-Werk 9048 P-2/3 Manual De Instrucciones página 21

• For safety reasons, only the manufacturer's
original spare parts may be used.
• Unsuitable or defective spare parts may
cause damage, malfunction or total failure of
the tool.
• The use of non-approved spare parts will void
all warranty, service and liability claims as well
as all claims for compensation against the
manufacturer or its agents, distributors and
sales representatives.
• The tool must be stored under
the following conditions:
• Do not store the tool outdoors.
• Keep tool in a dry and dust-free place.
• Do not expose to aggressive substances.
• Storage temperature: -10 up to +40°C.
• Relative air humidity: max. 65 %
• For disposal, clean the tool and disassemble in
accordance with the regulations for work safety
and environmental protection.
• Please recycle components.
; Güldenwerther Bahnhofstraße 25 - 29 • 42857 Remscheid • GERMANY
[ +49 (0) 21 91 / 7 92-0 • \ +49 (0) 21 91 / 7 92-375 • ^ hazet.de • ] info@hazet.de
4
Spare parts
5
6
Disposal
HAZET-WERK Hermann Zerver GmbH & Co. KG
Always wear personal protective equipment!
Storage
21