Routine Maintenance - Amano American Sanders American 12 Manual Del Operador

EN

Routine Maintenance

The following items need to be periodically inspected and main-
tained to keep your sander in good working condition.
Wheels
Periodically remove the debris from the truck and caster wheels.
Debris can cause waves on a sanded surface. Lubricate truck
mechanism every 25 hours of use. The machine is equipped
with lubrication fittings and are located on shaft supporting
mechanism.
Dust Bag
Remove the dust bag from the machine and shake it thoroughly
to remove the sanding dust from the dust bag. Turn the dust bag
inside out and machine wash in cold water to prevent pore block-
age and loss of dust recovery.
Drive Belt
Periodically check the drive belt tension.
Bearings
Periodically check the bearings for wear or damage according to
the following schedule:
Idler pulley.................. after 1st 1500 hrs.
Fan shaft .................... after 1st 2500 hrs.
Arbor shaft ................. after 1st 5000 hrs.
Motor shaft ................. after 1st 5000 hrs.
15