How To Transport The Machine - Amano American Sanders American 12 Manual Del Operador

EN
WARNING:
The machine is heavy. Remove the motor
from the machine before transporting. Get
help loading the machine and motor.
To transport the machine, follow this procedure:
1. Make sure the power cable is disconnected from the electrical
outlet.
2. Disconnect the handle plug connection. See figure 1.
3. Remove the belt cover.
4. Remove the fan belt.
5. Loosen the motor bolt. Using the ¾" wrench, turn the motor bolt
counterclockwise. See figure 2.
6. Slide the motor forward.
7. Remove the drive belt.
8. Remove the motor from the chassis.
To re-assemble the machine after transporting, follow this
procedure:
1. Reposition motor on chassis.
2. Install the drum belt. Slide the motor back until adequate tension
is achieved in belt.
CAUTION:
To prevent damage to the floor surface,
make sure the drive belt is tight.
3. Resecure the motor to the chassis.
4. Install the fan belt.
5. Install the belt cover.
6. Reconnect the handle plug.
Machine Transportation
8
Figure 1
Figure 2