Data Management/Display Of Measured Data - MIETHKE 75100000 Instrucciones De Uso

| INSTRUCTIONS FOR USE
GB
Fast measurement
There are two ways to start a fast measure-
ment:
On the start screen, press
start measurement by pressing
press to open the following submenu:
Fig. 14
Press to open the menu <measure-
ment>.
In the <measurement> menu, press
to select the <fast measurement> menu
The following is displayed on the screen:
Abb. 15
and confirm with
The following is displayed on the screen:
Fig. 16
40
and then
, or
and
.
Reader Unit Set for SENSOR RESERVOIR
Press to start fast measurement. Press
to return to the selection menu.
During fast measurement, the following is dis-
played on the screen:
Fig. 17
Press to stop the measurement.
For an explanation of the symbols for reception
quality: see chapter on "Continuous measure-
ment".
DATA MANAGEMENT/DISPLAY OF
MEASURED DATA
On the start screen, press
following submenu:
Fig. 18
Press and
management> menu and confirm with
Symbols for reception quality
to open the
to select the <data
.