Working With The Unit - hillvert HT-LM-53A Manual De Instrucciones

3.3.

Working with the unit

3.3.1 General mowing tips:
•
•
•
•
•
•
•
•
Grass must not be wet, as such will clog the mower preventing
the blade assembly from working evenly.
The grass must not be too tall - the maximum height of grass for
effective mowing is 25 cm. Set the mowing height so that the
mower cuts 1/3 of the height of the grass. If the grass height
exceeds 10 cm, mow it in stages - first set the maximum cutting
height and then lower it to the target height.
The cutting blade must be sharp - a dull blade tends to tug at the
tips of the grass blades, which leads to yellowing.
Regularly clean the underside of the mower, including the back,
as grass buildup and other debris can affect mowing
performance.
Drive the mower at the lowest possible speed.
When turning, mow a narrower part of the lawn than the width
of the mower and mow the edge of the lawn twice.
When mowing on slopes (up to 15o slope), always drive along the
slope, never drive under or off it.
The openings in the grass catcher box can become clogged over
time, so regularly rinse the empty grass catcher box under low