Descargar Imprimir esta página

hillvert HT-LM-53A Manual De Instrucciones página 48

Ocultar thumbs Ver también para HT-LM-53A:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 143
and then you can install the filter in the housing by carefully placing it in the cover
and closing it tightly.
3.4.5 Draining the fuel
Place the fuel container just below the precipitation filter housing (a) under the
carburettor (located behind the air filter housing) . Unscrew the drain plug (b) with
the washer (c) of the rain tank to drain the fuel from the carburetor. Fuel can be
drained from the tank by removing the fuel hose from the spigot on the bottom
of the tank (d).
3.4.6 Storage
CAUTION: Store the unit in a closed, cool, shaded, well-ventilated place away from
moisture and sunlight.
Before storing the device, first cool it completely and then clean it thoroughly (this
also applies to the basket). For additional safety, remove the ignition wire pipe
from the spark plug. Before storing an unused machine for an extended period of
time (more than one month), completely drain the fuel or add a stabilizer to the
fuel - then follow the fuel additive manufacturer's instructions. If the machine is
used only seasonally, it is recommended that the motor oil be replaced with new
oil before long-term storage.
CAUTION: Do not store fuel in the tank longer than recommended by the stabilizer
additive manufacturer!

Publicidad

loading

Este manual también es adecuado para:

Ht-lm-46mHt-lm-46Ht-lm-56a