Connect transducers and patient response switch only with the
device turned off.
The Triangle can be connected either to a PC for recharging and transferring test
data, or to the power adapter supplied. Use only the USB cable supplied with the
product.
2.5
K
EYBOARD
Control
USB cable for power adapter or PC
C
ONTROLS
Operation
When the device is OFF, press to
power ON. If the device is ON, press
to safely power it OFF, or hold down
for 10 seconds to turn off the device
without saving session data.
When pressed with other buttons,
enables the second functions
Send stimulus
Send masking
Store the hearing level
Store a "no response"
Talk to the patient through the mic
(located above the Talk over button)
Change the stimulus level
Change the masking level
EN
9