Acqua Brevetti PuliMATIC FT366 Instrucciones De Instalacion Y Uso página 33

A1.10 Upper panel
On the PuliMATIC display, it is possible to see the filter service settings and the presence of any
malfunctions or faults.
ALARM
Pressing the buttons
time.
A 1.11 Filter washing setting
The control unit allows the setting of cleaning in two ways:
1. Day/Time interval (TIME / DATE programming)
Day: minimum 1, maximum 4 – Scheduled time: day time to set.
2. Time interval: (FIXED INTERVAL programming)
Time: minimum 1 h / maximum 96 h.
Washing starts automatically when the set time has elapsed. During the cleaning the program
carries out 1 washing cycle which involves 3 rotations of the filter cartridge (opening - closing the
drain). You can set up to a maximum of 10 cycles per wash for a total of 30 rotations.
PuliMATIC is set up by company for cleaning every 4 days at 00:00 and for 1 wash cycle with 3
rotations. During the filter washing, a LED lights up inside which allows you to see, through the slits
in the front casing, the cleanliness of the cartridge.
A 1.12 Manual washing of the filter
To carry out a filter washing, press the buttons
PuliMATIC - ENGLISH
When the display is off in stand-by:
Filter properly powered
-
Filter in filtration position
-
Filter in the washing stage and LED lighting on
-
When the display shows "ALARM":
Filter out of order, see paragraph A3
-
simultaneously, it is possible to launch a washing cycle at any
MAN141 PAGE E-6
Symbol
simultaneously.
Filter action
Next menu\increase
Previous menu\decrease
Menu\editing\confirming