Lubricating The Brew Group - Gaggia Milano ANIMA Manual De Instrucciones

ENGLISH
20

Lubricating the Brew Group

Frequency of use
Low
Regular
High
4219-465-09541 MANUAL GAG. ANIMA PLUS EN-ES-PT Rev 00.indd 20
If the hook is still in a lower position, this means that it has not been correctly
positioned.
3 Slide the brew group along the side guides into the machine until it locks in the
right position with a click.
Warning: do not press the PUSH lever.
4 Close the maintenance door.
In order to ensure perfect performances of the machine, it is necessary to lubricate
the brew group. Refer to the following table for the frequency of lubrication.
Number of daily prepared beverages
1-5
6-10
>10
1 Switch off the appliance and unplug it.
2 Remove the brew group and rinse it using lukewarm water (see "Brew Group
Cleaning under Running Water").
3 Spread a thin layer of lubricant around the inserting pin in the lower part of the
brew group.
4 Spread a thin layer of lubricant onto the guides on both sides (see figure).
5 Reinsert the brew group (see "Reinserting the Brew Group").
Note: you can use the lubricant tube multiple times.
Frequency of lubrication
Every 4 months
Every 2 months
Every month
06/04/2022 11:13:19