General Safety Warnings
Safety is essential in the use and maintenance of
Greenlee tools and equipment. This instruction
manual and any markings on the tool provide
information for avoiding hazards and unsafe practices
related to the use of this tool.
Read all safety warnings, instructions, illustrations,
and specifications provided with this tool. Failure
to follow all instructions listed below may result in
serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS FOR
FUTURE REFERENCE.
• Use personal protective equipment (PPE).
Always wear eye protection. Protective
equipment used for appropriate conditions will
reduce personal injuries.
• Use this tool for the manufacturer's intended
purpose only. Use other than what is instructed
in this manual could result in a hazardous
situation.
• One person must control the work process
and machine operation. Only the operator
should be in the work area when the machine is
operating. This helps reduce the risk of injury.
• Keep handles and grasping surfaces dry,
clean, and free from oil and grease. Slippery
handles and grasping surfaces do not allow
for safe handling and control of the tool in
unexpected situations.
• Some parts and accessories of this tool are
heavy. Use proper lifting techniques to reduce
the risk of injury.
• Stay alert, watch what you are doing and use
common sense when operating this tool. Do
not use this tool while you are tired or under
the influence of drugs, alcohol, or medication.
A moment of inattention while operating power
tools may result in serious personal injury.
• Keep bystanders a safe distance from the
work area. Additional people close to the
operator increases the risk of injury to themselves
and the operator from distraction or interaction
with equipment.
4
Cam Track® Hydraulic Bender
• Do not let familiarity gained from frequent
use of tools allow you to become
complacent and ignore tool safety principles.
A careless action can cause severe injury within
a fraction of a second.
• Do not overreach. Always keep proper footing
and balance. This enables better control of the
tool in unexpected situations.
• Dress properly. Do not wear loose clothing or
jewelry. Keep your hair, clothing, and gloves
away from moving parts. Loose clothes, jewelry
or long hair can be caught in moving parts.
• Store idle tools out of the reach of children
and do not allow persons unfamiliar with
the tool or these instructions to operate the
tool. These tools are dangerous in the hands of
untrained users.
• • Maintain all equipment and accessories.
Maintain all equipment and accessories.
Check for misalignment or binding of moving
Check for misalignment or binding of moving
parts, breakage of parts and any other condition
parts, breakage of parts and any other condition
that may affect the operation. If damaged,
that may affect the operation. If damaged,
repair before use. Many accidents are
repair before use. Many accidents are
caused by poorly maintained equipment and
caused by poorly maintained equipment and
accessories.
accessories.
• • Keep work area clean and well lit.
Keep work area clean and well lit. Cluttered
or dark areas invite accidents.
or dark areas invite accidents.
• Daily before use, inspect the tool and correct
any problems before using to reduce the risk
of injury and prevent product damage. If any
problems are found, do not use this tool until
the problems have been fixed, failure to follow
these steps increases the risk of injury.
•
Proper set up is essential to minimize risk
during use. Set up the tool and work area
according to these procedures to reduce the
risk of injury.
Follow instructions from this manual when
•
repairing this tool and use only identical
replacement parts. Use of unauthorized parts
or failure to follow instructions increases the risk
of injury or damage to the tool.
Tool service must be performed only
•
by qualified repair personnel. Service
or maintenance performed by unqualified
personnel could result in a risk of injury.
© 2022 Greenlee Tools, Inc.
Cluttered
52093598 Rev 00