Descargar Imprimir esta página

Pre-Operation Inspection - Greenlee 881GX Cam Track Manual De Instrucciones

Publicidad

Idiomas disponibles

Idiomas disponibles

Pre-Operation Inspection

Daily before use, inspect the tool and correct
any problems before using to reduce the risk
of injury and prevent product damage. If any
problems are found, do not use this tool until the
problems have been fixed, failure to follow these
steps increases the risk of injury.
High pressure oil easily punctures skin,
causing serious injury, gangrene, or death. Do
not use hands to check for leaks. Stay away
from pressurized components. Depressurize
hydraulic system before disconnecting the hose/
attachments or servicing. If injured, seek medical
help immediately to remove oil.
1. Depressurize and disconnect the pump before
inspecting the bender. Visually inspect bender
piston seal, fittings, and hose connections for
leaking hydraulic fluid. If fluid is present, do not use
the bender and send it in for service.
2. Clean any oil, grease or dirt from the bender parts
and accessories. This aids inspection and helps
prevent the machine or control from slipping from
your grip. Clean and maintain per maintenance
instructions.
3. Inspect tool for wear and damage before use. Do
not use if any parts are worn, corroded, or cracked.
4. Check for proper assembly and completeness, do
not use if there are missing or misaligned parts. A
damaged, worn or improperly assembled item could
break and result in flying debris.
5. Check for the presence and condition of warnings
and decals.
6. Inspect any other equipment and accessories in
the bending system according to their instruction
manuals.
52093598 Rev 00
Cam Track® Hydraulic Bender
If using the extended yoke, inspect the ram and confirm
the piston support (Fig. 1) is installed. Do not bend with
the extended yoke if the piston support is not installed.
An unsupported ram can shift during bending resulting
in poor bends and damage to the tool that increases the
risk of parts breaking and causing injury.
If any problems are found,do not use until problems have
been fixed. Failure to follow these instructions increases
the risk of injury.
© 2022 Greenlee Tools, Inc.
Piston
Support
Extended
Yoke
Figure 1
9

Publicidad

loading