Tool Specific Safety Information; Greenlee Contact Information - Greenlee 881GX Cam Track Manual De Instrucciones

Tool Specific Safety Information

Before operating this tool, read and understand:
• This operator's manual
• The instructions for any other equipment or
material used with this tool
• Markings on the tool
• Required work-site safety procedures
Failure to follow all instructions and warnings may
result in serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS FOR
FUTURE REFERENCE.
• Keep your fingers, hands, and other body
parts away from bender, attachments, conduit
and moving parts. Body parts can be struck,
crushed, fractured, or amputated if they become
caught between the attachment or between these
components and any other object.
• Do not bend Aluminum EMT. Conduit may break
causing serious injury.
• Do not stand in a direct line with the follow
bar, hydraulic ram or conduit while bending.
The bender is under high pressure during use
and has the potential to break and throw parts,
causing serious injury.
• Do not alter this product in any manner or
attach any tools that are not specified in this
manual. Use of this bender with accessories and
equipment different from those specified could
result in a hazardous situation.
• High pressure oil easily punctures skin,
causing serious injury, gangrene, or death. Do
not use your hands to check for leaks. Stay away
from pressurized components. Depressurize
hydraulic system before touching the hose/
attachments. If injured, seek medical help
immediately to remove oil.
• Use only Greenlee hoses, attachments, and
accessories in good operating condition
with proper ratings for the tool. Do not alter
products from original design, worn, damaged or
improperly rated equipment can fail and cause
serious personal injury.
• Use proper combination of accessories for the
specific conduit size. Bends will be incorrect
and injury or damage to the tool could result.
• Use the correct tool and accessories for your
application. The correct tool will do the job better
52093598 Rev 00
Cam Track® Hydraulic Bender
and safer at the rate for which it was designed.
Use of the tool for operations different from those
intended can result in a hazardous situation.
Do not modify this tool. Modifying the tool in any
•
manner may result in personal injury and damage
to the tool.
Do not attempt to open the tool. It contains no
•
user-serviceable parts.

Greenlee Contact Information

If you have any questions, need to arrange service or
purchase parts or accessories for this Greenlee/HDE
product: Contact your local Greenlee distributor or
Greenlee's Customer Service Center
Additional copies of this manual are available for
download at www.greenlee.com
Greenlee Customer Service
USA: 1-800-435-0786 | Canada: 800-435-0786
International: 1-815-397-7070
GRNCustomerService@emerson.com
Shipping address:
Greenlee Factory Service Center
4411 Boeing Dr., Rockford, IL 61109
© 2022 Greenlee Tools, Inc. 5