Switching On The Hot And Cold Plate; Switching Off The Hot And Cold Plate; Switching The Cooling And Heating Function On And Off; Displaying The Required Temperature - Hupfer KWP Manual De Instrucciones

Operating Instructions
EN

8.1.1 Switching on the hot and cold plate

►
Move the main switch to position "I" or "II".
 The respective display shows the current temperature of the
surface, while the other one remains black.
When the hot and cold plate is switched on again, the last set required
temperature of the selected operating mode is stored and is
automatically activated.

8.1.2 Switching off the hot and cold plate

►
Move the main switch to the "0" position.
 Both displays go out.

8.1.3 Switching the cooling and heating function on and off

►
Move the main switch to the position of the desired operating
mode:
1. Position "I": Heating mode
2. Position "II": Cooling mode
The active display also shows which operating mode has been

selected.

8.1.4 Displaying the required temperature

►
Briefly press the corresponding setting key on the display of the
active operating mode.
The required temperature is shown in the active display.


8.1.5 Setting the required temperature

►
Briefly press the setting button on the display of the active
operating mode.
The required temperature is shown in the display.

►
Hold down the setting button on the active display and use the
Up and Down buttons to select the required temperature.
►
Release the setting button.
 The required temperature for the active operating mode is
changed.
Hot and cold plate
Page 18