VALBERG CNF 493 E X180C Instrucciones De Uso página 21

B
9. Change screw hole covers and screw on middle cover plate from left to right (as shown in
figure below).
10. Install middle hinge-left (in the plastic bag) . Transfer the upper door to the appropriate
position. Secure the door level, make the middle hinge axis into the lower hole of the upper
door. Install the hinge
door by hand when installing.
11. Take out the connector from the hole on the top left side. Then connect it with the door
switch on the upper hinge cover-left.
Electrical
connector
Using the appliance
2 (provided in the plastic bag)by screws
15
. Please hold the upper
1
1
1
Special flange screw
2
2
Upper hinge-left
Door
switch
EN