VALBERG CNF 493 E X180C Instrucciones De Uso página 35

C
Door seals cleaning
Take care to keep door seals clean. Sticky food and drinks
can cause seals to stick to the cabinet and tear when you
open the door.Wash seal with a mild detergent and warm
water. Rinse and dry it thoroughly after cleaning.
CAUTION:
Only after the door seals are completely dry should the
appliance be powered on.
Replacing the LED light:
The LED light should be replaced by a competent person. If
the LED light is damaged, contact the customer helpline for
assistance.To replace the LED light, the below steps can be
followed:
1. Unplug your appliance.
2. Remove light cover by pushing up and out.
3. Hold the LED cover with one hand and pull it with the other
hand while pressing the connector latch.
4. Replace LED light and snap it correctly in place.
Useful information
29 EN