VALBERG CNF 493 E X180C Instrucciones De Uso página 19

B
3. Press the door switch
in the plastic bag). Put the other cover
1
4. Unscrew screws
the conector 3 into the hole. Please hold the door by hand when installing.
5. Remove the upper door from the middle hinge by carefully lifting the door straight up.
Then Place the upper door on a smooth surface with its upper cover upwards.
Using the appliance
4
, then remove it upward. Install switch
2
5
4
by a 8mm socket driver or a spanner, and remove hinge
1
2
3
13
into the plastic bag.
5
1
Special flange screw
2
Upper hinge
3
Electrical connector
Fresh Zone
EN
5
4
into cover (provided
Upper hinge cover-left
2
. Then put