cecotec BOLERO DRESSCODE TOP 80 INVERTER Manual De Instrucciones página 89

Extra rinse
The laundry will undergo extra rinse once you select it.
Delay start
To set the Delay start function:
1. Select a programme, press the DelayEnd button to choose the time (the delay time can be
set in 0-24 hours in 3-hour intervals).
2. To activate the delay start, press the Start/Pause button.
Fig. 20
Choose a programme > Set the time > Start the programme
To cancel the delay start function:
Press the Delay button until the display shows 0H. You must do it before starting the
programme. If the programme has already started, switch off programme to reset a new one.
Temp.
Press this button to select the desired temperature (Cold, 20ºC, 30ºC, 40ºC, 60ºC, 90ºC).
Spin
Press this button to change the spin speed.
1200: 0-600-800-1000-1200.
1300: 0-600-800-1000-1300
(depending on the model)
Child lock system
It is used to prevent children from operating the device.
Choose a programme > Press Start/Pause > Hold down the Spin and DelayEnd buttons for 2
seconds until it beeps.
Warning
- When the child lock function is active, the device will beep 3 times when you press the
buttons.
Hold down both buttons for 3 seconds to deactivate the child lock.
-
The child lock disables all the buttons except for the On/off button.
-
If the mains power is off, the child lock will be deactivated.
-
Mute
Choose a programme, then hold down the Spin button for 3 seconds to mute the device.
To activate the sound again, hold down the same button for 3 seconds. The setting will stay
active until you restart the device.
BOLERO DRESSCODE TOP 80 INVERTER
ENGLISH
89