E21
E12
EXX
Note
After performing the necessary checks, restart the machine. If the problem persists or the
display shows another error code, contact the Technical Support Service.
Transport
Important steps you must follow to transport the device:
Unplug the device and close the water inlet tap.
-
Check if the door and the detergent drawer are properly closed.
-
Remove the water inlet hose and drain hose from your home installation.
-
Let the water drain completely out of the appliance (check the 'Drain pump filter cleaning'
-
section).
Important: Place the 4 transport bolts again in the rear part of the washing machine.
-
This appliance is very heavy. Transport it with care. Do not hold the appliance by its
-
protruding parts to lift it. Do not use the machine door as a handle.
8. TECHNICAL SPECIFICATIONS
Reference:
QR code
Power supply: 220-240 V~, 50 Hz
Power: 2000 W
Maximum power: 10 A
IPX4
Maximum load (dry clothes): 8 Kg
Maximum water pressure: 1 MPa
Overtime water draining
Water overflow
Others
Model
Check if the drain hose is
blocked
Restart the washing machine
Try again and contact the
Cecotec Technical Support
Service if the warning does
not disappear
02380
Bolero DressCode Top 80 Inverter
BOLERO DRESSCODE TOP 80 INVERTER
ENGLISH
93