Sign Up And Log In; Configure The System; Iaqualink Control; Iaqualink Control Home Screen - Polaris VTRX25iQ Manual Del Propietário

Page 12

Sign Up and Log In

Click Sign Up to create a new user account. Or, if
you previously set up an iAquaLink account, click
Log In to access your systems.
Complete all required fields in the Account Set Up
page and agree to the Terms and Conditions.
Configure the System
1. On the My Systems page, click
upper right-hand corner to add a system.
2. Choose "Robotic Cleaner" from the list and
choose your model type.
3. On the Control Box, press
Bluetooth light indicates status:
BLINKING - searching for signal
SOLID - paired with phone
4. Follow on-screen prompts to add your
cleaner and connect to your home router.
Wi-Fi light indicates status:
BLINKING - connected to router
SOLID - connected to the internet
NOTE: The searching screen may take a few minutes to
find your router. If you receive an error you may
have a weak router signal at the location of your
control box OR you may have entered an incorrect
Wi-Fi password. In the case of a weak router signal,
consider installing a Wi-Fi extender to boost your
signal strength. (See iAquaLink Troubleshooting
section.)
6
Once you have downloaded the iAquaLink app and
connected the device to Wi-Fi, the iAquaLink app
allows for robotic cleaner control from anywhere,
anytime. Functions vary within the iAqualink app
depending on which cleaner model you have.
+
in the
iAquaLink
App function and design is subject to change.
Start/Stop Cleaning
Remote
Clean Mode
Lift System
Start / Stop Cleaning and Adjust
Cleaning Time
The factory default cleaning surface setting is
SMART Cycle (Floor, Wall, Waterline).
SMART Cycle calculates a customized cleaning
time optimized for your pool. On the first run of
SMART Cycle, the app counts up as it calculates
the optimized cleaning time.
On periodic SMART Cycle cleaning, the app will
count down from the optimized cleaning time.
iAquaLink
Control
WARNING
Do not enter pool while the robotic cleaner
is in water.
Control Home Screen
®
+
+
Manual Time
_
Adjustment
(current run time +/-
15 minutes)
_
°C / F
®
Dirty Canister
Indicator
Water
Temperature
Display