Store The Cleaner When Not In Use - Polaris VTRX25iQ Manual Del Propietário

Page 16
Figure 14. Remove Filter Canister Assembly
5. Push the quick release button on the
canister assembly (4) and pull open (5) as
shown in Figure 15.
Figure 15. Open Filter Canister Assembly
6. Separate the filter canister from the filter
support (6), as shown in Figure 16.
Figure 16. Remove Filter Canister
7. Empty all debris from the filter canister,
then rinse the canister, the filter support
and the cleaner using a hose, as shown in
Figure 17.
Figure 17. Wash Filter Canister
NOTE: Periodically, remove the filter canister and clean
thoroughly with soapy water and a soft bristle brush.

Store the Cleaner When Not in Use

The cleaner should be cleaned regularly using
slightly soapy clean water. Do not use solvents
such as trichlorethylene or its equivalent. Rinse
the cleaner generously using clean water. Do not
let your cleaner dry in direct sunlight near the pool.
The cleaner should be stored on its caddy so that
it dries quickly.
1. Disconnect cleaner from the power source.
2. Starting at the cleaner head, remove all
coils and tangles from the cable (Figure
18). Lay the cable in the sun to loosen any
tangling memory.
3. Place the rear wheels on the caddy and
position the cleaner vertically on the
caddy base.
4. Disconnect the cable from the control
box. Replace the protective cap on the
control box.