What To Do If; Servicing/Customer Service - Orbitalum RPG ONE Traducción Del Manual De Instrucciones Original

ENGLISH
Servicing, maintenance, troubleshooting
10.2 What to do if ...? – General trouble shooting
PROBLEM
The tool (multifunctional tool) is
catching during machining.
Rechargeable battery power
system of the RPG Cordless does
not work.
Tool tends to vibrate.
Strong tendency to vibrate.
The processed tube is jagged or
has a burr which is too big.
10.3

Servicing/customer service

For ordering spare parts, refer to the spare parts list.
For troubleshooting, please contact the branch responsible directly.
Please indicate the following details:
• Type of machine: tube squaring machine
– RPG ONE (cordless)
– RPG ONE (Electric)
– RPG 1.5 (cordless)
– RPG 1.5 (Electric)
– RPG 2.5 (cordless)
– RPG 2.5 (Electric)
• Machine-no.: (see type plate)
78
ORBITALUM TOOLS GmbH D-78224 Singen www.orbitalum.com
POSSIBLE cAUSE
Feed is too big or battery is almost empty.
MFW or WH loose.
Battery completely discharged.
Battery not connected to RPG Cordless.
Speed too high.
Axial or radial play in the components.
MFW loose.
MFW blunt.
RPG ONE, RPG 1.5, RPG 2.5
REMEDY
X Disassemble tool holder and take out
tube from the machine.
X Remove chip using side cutting pliers and
file off section.
X Introduce carefully during new processing.
X Screw in MFW or WH tightly.
X Charge battery (refer to attached operating
instructions of the charger).
X Use spare battery.
X Connect battery to RPG Cordless.
X Reduce speed (see chap. 9.2, p. 72).
X Check machine for freedom from play.
X Check MFW on fixed seat.
X Replace MFW.
[REV. 20190314] OC_RPG_S_BA_790036765_00__INH-02_EN