Wash Cycle Table - VALBERG 12S47 E S929C Instrucciones De Uso

B
Using the appliance
Filling the detergent dispenser
1. Press the release latch on the detergent dispenser to open the cover.
Push latch to open
A
2. Add detergent into the larger cavity
wash loads, also add some detergent into the smaller cavity
3. Close the cover and press on it until it locks into place.
NOTE
• Please observe the manufacturer's recommendations on
the detergent packaging.
26
for the main wash cycle. For more heavily soiled
B
for release during pre-wash.
EN
B
Using the appliance

Wash cycle table

• The table below shows which programs are best for the levels of food residue on them and
how much detergent is needed. It also show various information about the programs.
• Consumption values and program duration are only indicative except for ECO program.
( ) indicates that the program uses rinse aid in the last rinse.
Detergent
Description of
Program pre/main
cycle
wash
Pre-wash (50 °C)
Wash (65 °C)
4/16g
Rinse
Rinse
Intensive
1 or 2 tabs
Rinse (65 °C)
Drying
Prewash
Eco
4/16g
Wash (45 °C)
(*EN60436) Rinse (60 °C)
1 or 2 tabs
Drying
Prewash
Wash(50 °C)
4/16g
Rinse
Glass
1 tab
Rinse(65 °C)
Drying
Wash(60 °C)
90 '
20g
Rinse
Rinse(65 °C)
90 min
1 tab
Drying
Wash (50 °C)
12g
Rinse
Rapid
1 or 2 tabs
Rinse (45°C)
NOTE
The ECO program is suitable to clean normally soiled
tableware, that for this use, it is the most efficient program
in terms of its combined energy and water consumption,
and it is used to assess compliance with the EU ecodesign
legislation.
27
Running Energy Rinse
Water (L)
time(min) (kWh) aid
205 1.621 17.8
230 0.923 11.0
120 1.100 14.2
90 1.350 11.5
30 0.751 11.2
EN