Connecting The Cooling Device - Mobicool MCF 32, Instrucciones De Montaje

MCF32, MCF40, MCF60, FR40 AC/DC
 Do not leave the cooling device open for longer than necessary.
 If the cooler has a basket: For optimal energy consumption, position the
basket according to its position on delivery.
 On a regular basis, make sure the lid seal still fits properly.
 Defrost the cooling device once a layer of ice forms.
 Avoid unnecessarily low temperatures.
6.3

Connecting the cooling device

The cooling device can be operated with DC or AC voltage.
A
NOTICE! Danger of damage!
Disconnect the cooling device and other consumer units from the
vehicle battery before you connect the vehicle battery to a quick
charging device.
Overvoltage can damage the electronics of the cooling device.
For safety reasons the cooling device is equipped with an electronic system
to prevent the polarity reversal. This protects the cooling device against short-
circuiting when connecting to a battery.
➤ Plug the DC connection cable into the DC socket and connect it to a DC
power socket.
➤ Plug the AC connection cable into the AC voltage socket and connect it to
an AC mains.
➤ Close the covers of the sockets not in use to prevent accidentally touching
the sockets. This also prevents dust, water and dirt from entering the
socket.
EN
Operation
13