Publicidad
Idiomas disponibles
Idiomas disponibles
Cleaning the fresh water tank filter
Caution:
Clean the fresh water tank filter after the end of op-
eration.
Clogged filters can inhibit the supply of detergents and
thus lead to surface damage.
• The machine must be switched off (main switch).
• Unscrew the fresh water tank filter
and remove it.
• Rinse the filter thoroughly with clean
water.
Notice:
The filter is lower than the drain hole of the tank. A
rest amount of cleaning solution will run out only
when the filter is removed.
• Put the filter back and twist it closed.
Removing and cleaning the brush
Notice:
Clean the brush whenever cleaning work is com-
pleted.
• The machine must be switched off.
Single disc Deck:
• Rotate the tool counterclockwise
away from the tool connection using
your foot.
Double disc Deck:
• Push the tool ejector briefly but firmly
with your foot.
Roller brush Deck:
1
3
14
Orbital Deck:
• Remove the brushes and clean them under running water.
Cleaning the machine
Caution:
Never clean the machine with a high-pressure
cleaner or water jet.
Water ingress in the machine may cause considerable
damage to the mechanical or electrical parts.
• Wipe the machine with a moist cloth.
Storing / parking the machine (not in opera-
tion)
Caution:
The machine must be switched off. Remove the key.
Notice:
Store the machine with a lifted suction nozzle, lifted
brush and open tank cover.
Thus, the tank can dry, and the generation of mold and
unpleasant odors is prevented.
Caution:
Never store the machine with uncharged batteries.
Otherwise, the batteries will be damaged beyond repair.
2
1
2
Service, maintenance and care
The maintenance of the machine is a prerequisite for impeccable op-
eration and a long service life.
Warning:
This machine may only be lifted using lifting gear
(e.g. hoist, loading ramp, etc.).
The heavy weight of the machine, can cause injuries by
lifting.
Caution:
Use original TASKI parts only; otherwise any war-
ranty and liability claims will be invalidated.
Notice:
In order to rule out unintended machine functions,
the following must always be carried out before
starting maintenance works
- the machine must be switched off,
- the key can be removed.
• Manually remove the orbital pad from
the pad holder.
• Open the tank cover, carefully push
om the tank cover release [1] and
lower the tank cover [2] until it rests
on the tank.
Publicidad
