WMF STELIO Instrucciones De Uso página 11

Afterwards turn back the control knob to
again. When the buzzer sets in again, switch off the appliance and take out the
medium boiled eggs.
For the remaining eggs to be boiled hard, turn the control knob to the symbol For the remaining eggs to be boiled hard, turn the control knob to the symbol
and switch on the appliance again. Wait until the buzzer sets in.
In case you do not wish any medium eggs, you can maintain the adjustment and
continue the boiling in order to obtain hardboiled eggs, after you have taken out
the soft eggs.
Cleaning and service
Pull the plug and cool the appliance. Do not immerse the appliance in water, but
wipe with a damp cloth to which a dishwashing agent has been added and then
wipe dry. Do not use sharp and abrasive cleaning agents. The cooking tray is made
of stainless steel. If rust spots are seen regardless, these are initially only deposits
adhering to the surface. They should be removed immediately with stainless steel
cleaner.
Descaling
Limescale deposits lead to energy losses and have a negative effect upon the
appliance service as well as the cooking results. The appliance switches off
prematurely if the layer of limescale is too thick. The limescale is then very
difficult to remove. Therefore descale the appliance regularly.
We recommend using Cromargol®. This product is highly effective, food safe and
is neutral in taste and smell. Thanks to its special care formula with six high-
quality and protective additives, Cromargol® is also very gentle on materials.
You can usually purchase Cromargol® from the store where you have purchased
your appliance or from your chosen dealer.
▪ Prior to descaling, unplug the appliance from the mains and allow it to cool
down.
▪ Pour half a portion (50 ml) of Cromargol® into the heating bowl and leave
the appliance to stand until the layer of limescale has detached from the base.
Then fill the heating bowl with cold tap water to cover the limescale ring on
the wall and leave to stand for 15 minutes.
▪ Then pour out and thoroughly rinse with cold tap water.
▪ Measure out and use other descaling agents according to the manufacturer's
instructions.
Do not heat the solution during descaling.
Caution: the warranty does not cover damage caused by not observing the
descaling instructions.
and switch on the appliance
11