How To Remove And Install; How To Replace: Lamp; Troubleshooting; Service Data - AEG BEK435220M Manual De Instrucciones

11.4 How to remove and install:

The number of glass panels is different for
different models.
CAUTION!
Carefully handle the glass,
especially around the edges of
the front panel. The glass can
break.
Step 1
Turn off the oven. Wait until the
oven is cold.
Top lamp
Step 1 Turn the glass cover to remove it.
Step 2 Clean the glass cover.
Step 3 Replace the lamp with a suitable 300 °C heat-resistant lamp.
Step 4 Install the glass cover.

12. TROUBLESHOOTING

WARNING!
Refer to Safety chapters.
12.1 What to do if...
In any cases not included in this table please
contact with an Authorised Service Centre.
Problem
The oven does not heat
up.
The display shows
"12.00".
Before you replace the lamp:
Disconnect the oven from the
Check if...
The fuse is blown.
There was a power cut.
Set the time of day.

11.5 How to replace: Lamp

WARNING!
Risk of electric shock.
The lamp can be hot.
Step 2
Put a cloth on the bottom of the cav‐
mains.
Problem
The lamp does not work.

12.2 Service data

If you cannot find a solution to the problem
yourself, contact your dealer or an
Authorised Service Centre.
The necessary data for the service centre is
on the rating plate. The rating plate is on the
front frame of the oven cavity. Do not remove
the rating plate from the oven cavity.
Step 3
ity.
Check if...
The lamp is burnt out.
ENGLISH 25