Control Panel - SK magic ACL-25C1A Manual Del Usuario

Control Panel

Power button,
Clean lamp
Button
•
•
•
•
•
•
12
Press this button to operate or stop the product.
The guide ring displays the air quality (dust + gas).
– Good: Blue, Normal: Green, Bad: Orange, Very Bad: Red
Press this button to cycle through the Low, Medium, and High speed
settings. The default speed is Low. Press this button to cycle through the
speed settings as follows:
• Low speed • • Medium speed
Sleep mode
Press the [Speed] button while operating at High speed to enter Turbo
mode.
– The same • • • light as used for High speed will turn on.
– For Turbo mode, the
Press the [Speed] button two times while operating at High speed to
enter Sleep mode.
– All the LEDs will turn off and the RPM will change.
– For Sleep mode, the
Press and hold the [Speed] button for 5 seconds to operate the key lock.
– When locking, operation of the Touch unit on the display will turn off
until unlocked.
Speed Auto Display
button button button
Description
• • • High speed
icon will appear.
icon will appear.
Wi-Fi
button
• • • Turbo mode