Filter Replacement
These notices are guidelines only. Any filter will need to be changed more often depending
•
on the amount of particulates passing through the product. High amounts of air
particulates , such as dust, dander, or cigarette smoke, will result in any filter working less
effectively and necessitate more frequent filter changes.
You should check the Pre-filter and All-in-One Care filters from time to time depending on
•
how often you use the product. If there are strong or heavy odors in your home, you may
need to change your filters more often.
To maintain intended performance, please only use SK magic product filters.
•
The particulate matter adsorbed on the All-in-One Care filter will not be released outside via
•
the outlet. The change in the color of the surface of the All-in-One Care filter is due to the
fact that it has an excellent dust-filtering function, so it can be used safely until replacement.
It is recommended to replace the Pre-filter every 4 months to ensure long-lasting
•
functionality.
CAUTION
Always unplug the power cord before replacing the filter.
•
When assembling the filter, be sure to check the front (the side with a pull-out handle).
•
After replacing the filter, turn on the product and press the [Auto] button for 5 seconds.
•
When the beep sounds, the filter replacement notification will be turned off and the filter
life timer will be reset. If the filter is replaced with a new filter and you do not receive a
filter replacement notification, perform a filter reset. (The filter replacement notification is
a function that applies only to the All-in-One Care filter, and the Pre-filter does not have a
separate filter replacement notification lamp.)
Filter Cleaning and Replacement Cycle
Filter
Pre-filter
All-in-One Care filter
The filter replacement cycle may vary depending on the usage environment.
(For how to clean the Pre-filter, refer to "Cleaning" - "Pre-filter.")
Cleaning
Once every 2-4 weeks
-
Replacement
4 months
(recommended)
12 months
Remark
Washable
Unwashable
19