SK magic ACL-25C1A Manual Del Usuario página 25

2. Remove the All-in-One Care filter by
holding the handle at the top of the filter
and pulling it outward.
CAUTION
Be sure to hold the product's body tightly
•
to prevent it from falling over.
3. Use a vacuum cleaner to remove dust from
the Pre-filter surrounding the All-in-One
Care filter.
If dust is difficult to remove with a
•
vacuum cleaner, remove the Pre-filter
from the All-in-One Care filter and
wash it gently with water.
– When washing with water, the Pre-
filter may become wrinkled, but
this will not adversely affect the
performance of the filter.
4. When washing the Pre-filter with water,
dry it completely and reassemble it
with the All-in-One Care filter, and then
reinstall the assembled filter in the
product.
When assembling, assemble in reverse
•
order.
25