Replacing the Pre-filter and All-in-One Care Filter
All-in-One Care filter
20
1. Remove the front cover by slightly lifting it
upward and pulling it.
2. Remove the All-in-One Care filter by
holding the handle at the top of the filter
and pulling it outward.
CAUTION
Be sure to hold the product's body tightly
•
to prevent it from falling over.
3. Remove the plastic packaging from the new
filter.
Replace filters according to the
•
replacement time.
The Pre-filter can be separated from the
•
All-in-One Care filter by removing the
Velcro.