SK magic ACL-25C1A Manual Del Usuario página 13

Button
On the pictogram • appears during [Auto] mode operation.
•
The speed LED indicates the dust concentration as shown in the table
•
below.
After the product is used for a certain period, the
•
– Press and hold the [Auto] button for more than 5 seconds to reset it,
and the timer will restart.
Press the [Display] button to cycle through the current numerical values
•
of PM 1.0, PM 2.5, and PM 10.
– The default is a screen displays PM 2.5, and when clicked, it will
change in the following order: PM 2.5
Press this button to use Wi-Fi when it is available. You connect the
•
product to the app.
Press and hold the [WiFi] button for 3 seconds to switch to pairing mode
•
and the Wi-Fi LED will blink.
– Pairing mode lasts for 10 minutes, and if not connected to the Wi-Fi
router within 10 minutes, the LED will turn off.
(IoT)
– Please refer to the IoT manual for more details.
The Wi-Fi LED will turn on when the product link is complete.
•
Description
Dust concentration
Extreme
Bad
Normal
Good
Speed LED indications
• • •
• • •
• •
•
icon will appear.
PM 10 PM 1.0 OFF
13