SK magic ACL-25C1A Manual Del Usuario página 15

The clean lamp will turn on when the air cleaner is operating.
•
Display
Each time the [
•
PM 10, PM 1.0, Screen Off, and PM 2.5; the default setting is PM 2.5.
If different products are used in the same space, differences in the concentration of coarse
•
particles and fine particles may occur due to air circulation.
There may be differences between coarse particles and fine particles, depending on the
•
usage environment, such as if the product is near a construction site, you are using a
vacuum cleaner, or cleaning blankets.
In environments where yellow dust occurs or outside air is introduced, the color may be
•
consistently displayed as Very bad.
NOTE
The colors of the comprehensive air quality will be displayed by comprehensively
•
considering coarse particles, fine particles, and gas conditions.
The comprehensive air quality is displayed based on the worst condition among coarse
•
particles, fine particles, and gases.
In other words, if coarse particles and gases have a "Good" condition, but fine particles
have a "Bad" condition, the comprehensive air quality will be displayed as "Bad".
Clean Lamp
Comprehensive air
quality
Fine particles
(PM 2.5, PM 1.0)
Coarse particles
(PM 10)
The figures indicated above are based on the results of SK magic's own independent testing.
•
Different results may be observed from product to product and vary depending on the
measuring methodology used. Your results may vary.
Check Message Verification
Check
Message
If the control panel is not placed on the external grill, a buzzer will sound
and the drt notification will appear.
•
CAUTION
If a drt notification appears, the motor will not rotate.
•
] button on the upper control panel is pressed, it will cycle between
Blue
Good
Less than 12
Less than 54
Make sure to place the control panel on the external grill.
Green Orange
Normal Bad
13 - 35 36 - 55
55 - 154 155 - 254
Description
Red
Very bad
56 or higher
255 or higher
15