Storage, Handling And Removal Instructions; Storage And Handling; Removal Instruction; Troubleshooting Guide - Hillrom HUG-U-VAC Manual De Instrucciones

INSTRUCTIONS FOR USE

Storage, Handling and Removal Instructions:

3.4.1

Storage and Handling:

The product should be stored in a clean and safe environment to prevent product
damage. See storage Specifications under Product Specification section.
3.4.2

Removal Instruction:

Removal is the reverse of installation.
DO NOT leave the Hug-U-Vac valve closed with suction still applied in
between procedures or in storage. Leaving the suction connected will lead
to collapsing and damage of the internal beads and thus, greatly reduce
the life of the product.

Troubleshooting Guide:

This device does not have a troubleshooting guide. For technical support user of the
device shall first contact Hill-Rom Technical Support.

Device Maintenance:

Make sure that all labels are installed and can be read. Replace labels as necessary
by using a plastic scraper to remove the label. Use an alcohol wipe to remove any
adhesive residue.
Contact Allen Medical Systems, Inc. if you need to repair or replace the device
contact us using the information from the contact details section (1.3).

4. Safety Precautions and General Information:

General Safety Warnings and Cautions:

WARNING:
a. Do not use if product shows visible damage.
b. Prior to using this device, please read the instructions for equipment set up and
use. Familiarize yourself with the product before application on a patient.
c. To prevent patient and/or user injury and/or equipment damage, examine the
device and surgical-table side rails for potential damage or wear prior to use. Do
not use the device if damage is visible, if parts are missing or if it does not function
as expected.
d. Ensure that the valve is held securely by the nozzle when removing suction tubing
or valve damage may occur.
Document Number: 80028181
Version: B
Page 18
Issue Date: 27 MAR 2020
Ref Blank Template: 80025117 Ver. F