Equipment Setup And Use; Prior To Use; Setup - Hillrom HUG-U-VAC Manual De Instrucciones

INSTRUCTIONS FOR USE

3. Equipment Setup and Use:

Prior to use:

a. Inspect the product looking for any visible damage or sharp edges that could be
caused by a drop or impact during storage.
b. Make sure product has been properly cleaned and disinfected and wiped dry
prior to each use.

Setup:

a. Place the Hug-U-Vac® on the Operating Room (OR) table for final patient position.

Align the positioner longitudinally on the OR table with the bottom edge
approximately aligned with the perineal cut-out.
b. Secure the Hug-U-Vac® straps to the side rails of the OR table in such a way that
the positioner is centered on the OR table.
A) Thread free end
of strap behind side
rail of OR table.
Document Number: 80028181
Version: B
B) Thread end up
through bottom of
top buckle slot.
Page 13
C) Thread end D) Grab hold of
down through free end and
remaining slot in cinch tight.
buckle.
Ref Blank Template: 80025117 Ver. F
Issue Date: 27 MAR 2020