Electronic Equipment; Safety Devices; Electronic Circuit Board - EdilKamin CALGARY Instalación Uso Y Mantenimiento

Ocultar thumbs Ver también para CALGARY:

Idiomas disponibles

LEONARDO

is a combustion safety and control system which

allows optimal performance in all conditions thanks to two sen-

sors measuring the pressure level in the combustion chamber

and smoke temperature. The detection of and subsequent opti-

misation of these two parameters is continuous in order to cor-

rect operation anomalies in real time. The LEONARDO

The standards for installation must be respected. LEONARDO

system is also able to recognise the type of pellets and automa-

level of combustion.

SAFETY DEVICES

THERMOCOUPLE:

Placed at the smoke outlet to detect the temperature.

Turns the boiler on and off and controls its operation based on

VACUUM GAUGE (electronic pressure sensor):

value (compared to the installation environment) in the combu-

stion chamber.

WATER SAFETY THERMOSTAT:

Trips when the temperature inside the boiler is too high.

Reset manually (see pag. 26).

TANK SAFETY THERMOSTAT:

Located on the system that loads the pellets from the hopper.

SERIAL PORT

the rear oh the boiler.

Can be connected via special optional trestle (code 640560).

BACKUP BATTERY

A backup battery is found on the control board (3-Volt CR 2032

battery).

Its malfunction is indicated with the following messages: (not