I Nstallation C Learances - Amana ASXS61A Serie Instrucciones De Instalación

I C
nstallatIon learanCes
• Installation clearances mean required clearances for installation, maintenance and enhancing system performance.
• The following installation clearances are based on the cooling operation in 95°F ambient condition. In the case systems
operate more than 95°F ambient condition or the cooling load is greater than system maximum capacity, it is desirable
to leave greater clearance.
• Working space and ventilation should be considered.
• Keep more than 10" clearance on the right side of unit for working space.
• Dimension "H" is the height from the ground to the top of the unit, and dimension "L" is the height of the wall.
*¹ If you put a unit on a stand, any gap between the unit and ground has to be closed to avoid bypassing outlet air.
1.5 - 3.0 ton
One unit installation
Open top installation
1. Wall facing inlet side
Closed top installation
1. Wall facing inlet side
Wall facing inlet and outlet side
• Wall facing outlet side is higher than unit
1. Open top installation
2. Wall facing three side
2. Wall facing three side
2. Closed top installation*
4
ASXS6S̲3P679063-2D̲ALL̲220729.pdf
3. Wall facing outlet side
3. Wall facing outlet side
L
L ≤ 0.5H
L ≤ H
0.5H < L ≤ H
Use a stand to meet L ≤ H.
L > H Required dimension A is same as
L ≤ H.
unit: inch
A
30" Minimum
40" Minimum