Double decker installation
1. Wall facing outlet side
Multiple rows of series installation
(There is no restriction on the height of the wall.)
1. One row of stand alone
installation
3.5 - 5.0 ton
One unit installation
Open top installation
1. Wall facing inlet side
Closed top installation
1. Wall facing inlet side
2. Wall facing inlet side
2. Rows of series installation
(2 or more)
2. Wall facing three side
2. Wall facing three side
6
ASXS6S̲3P679063-2D̲ALL̲220729.pdf
Note:
• Do not stack more than two units.
• If drain water might freeze, install the roof
between the units.
• To avoid frost under the bottom frame,
leave 20" minimum clearance between
the units.
L
L ≤ 0.5H
L ≤ H
0.5H < L ≤ H
Not available.
L > H
Note:
• Do not install inlet side and outlet side face
to face.
3. Wall facing outlet side
3. Wall facing outlet side
unit: inch
A
6" Minimum
8" Minimum
unit: inch