Charging; Charge Information; Charge Control Wheel - Ingeteam NEO Manual De Usuario

Ingeteam
7.2.

Charging

This screen will allow you to operate and obtain information in real time during the vehicle charging processes. In
it you will find three different sections:

7.2.1. Charge information

• Start: Shows the time the vehicle was connected to the charger.
• Charge: Shows the accumulated consumption of the charge in progress, measured in kWh.

7.2.2. Charge control wheel

• The number in the center of the wheel indicates the power/intensity at which the vehicle is charging in
real time. In single-phase units, pressing this number will display the magnitude and scale of the wheel
in kW or A alternatively.
• The band on the outside of the wheel indicates the range of power/intensity in which you can move the
charge selector. This range will be:
— Minimum: minimum power/intensity allowed by electric vehicles (6 A).
— Maximum: minimum power/intensity between that of the installation and that of the active timer
at any given time, depending on how these parameters are configured in the charger settings and
timer.
• The pointer on the outer band is the charging selector that allows you to select the maximum charging
power/intensity at which the vehicle can be charged.
Charge control wheel (with Dynamic Power Control)
If Dynamic Power Control (CURVE or CURVEx3) is activated in the settings, the charge control wheel will have the
following modifications:
• Under the magnitude you will see the acronym DPC (Dynamic Power Control).
• On the outer band of the wheel the power/intensity range will be:
— Minimum: minimum power/intensity allowed by electric vehicles (6 A).
— Maximum: minimum power/intensity between that of the installation and that of the contracted/
available power, depending on how these parameters are configured in the charger settings.
• The charging selector disappears since the charger itself sets the maximum charging power/intensity at
which the vehicle can be charged based on the consumption of the home at any given time.
16
Charger management from the INGETEAM NEO App
Charge information
Charge control wheel
Actions buttons
ABV2014IQM01_ - User Manual