Section 3- Troubleshooting - MedLinket AM801 Manual Del Usuario

Warning
● Uncomfortable or painful feeling may appear if use the device ceaselessly,
especially for the microcirculation barrier patients. It is recommended that the
sensor should not be applied to the same finger for over 4 hours.
● For the special patients, there should be a more prudent inspecting in the placing
process. The device cannot be clamped on the edema and tender tissue.
● The light (the infrared is invisible) emitted from the device is harmful to the eyes,
so the user and the maintenance man should not stare at the light.
● Testee cannot use enamel or other makeup.
● Testee's fingernail cannot be too long.
● This device is not intended for treatment.
● The user is not allowed to repair the equipment. Changes or modification not
expressly approved by Shenzhen Med-link may void the warranty.
● Removing the batteries to avoid battery leakage and device damage if long time
no use.
●The symbol of "?" will be displayed on the screen when there's signal inadequacy,
indicating the displayed SpO2 or pulse rate value is potentially incorrect.
Note: The device has No Alarm System, just only warning signal is provided.

Section 3- Troubleshooting

This section explains how to troubleshoot the PULSE OXIMETER. Tables list possible
PULSE OXIMETER difficulties, along with probable causes, and recommended
actions to correct the difficulties. Detailed see table 2 as below.
Table 2：Instruction for Menu setting
Phenomena
Abnormal starting-up
of Pulse-Oximeter
(display screen and
transmitting tube of
LCD presenting lights
off）
Possible Causes
The power button was not
pressed in place
Not Install battery
Battery use-out
Install battery improperly Partial
damage of Metal dome (which is
directly connected to the battery).
Damage in Connection between
mainboard and battery holder
(i.e. Damage in flexible printed
circuit board (FPCB) or break in
welding spot).
English 18
Solutions
Re-press the power button
in place, and keep 1-2
seconds
Install battery
Replace battery
Check and re-install battery
Contact authorized
distributors
Contact authorized
distributors