Safety Information; Conventions In This Document - Dräger X-plore 8000 Instrucciones De Uso

en |

Safety information

1 Safety information
Dräger X-plore 8000 Face Shield
1.1 General safety instructions
– Before using this product, carefully read these instructions
for use and those of the associated products.
– Strictly follow the instructions for use. The user must fully
understand and strictly observe the instructions. Use the
product only for the purposes specified in the intended use
section of this document.
– Do not dispose of the instructions for use. Ensure that they
are stored and used appropriately by the user.
– Only trained and competent users are permitted to use
this product.
– Use only genuine Dräger spare parts and accessories.
Otherwise, the proper functioning of the product may be
impaired.
– Notify Dräger in the event of any component fault or
failure.
– Comply with all local and national rules and regulations
associated with this product.
– Do not use a faulty or incomplete product. Do not modify
the product.
These instructions for use can be downloaded in other
languages from the Technical Documentation Database
(www.draeger.com/ifu) in electronic form.
1.2 Product-specific safety instructions
X-plore 8000 Face Shield
– Ensure there is an unobstructed supply of fresh air to the
face shield.
– Before use, check whether this product is suitable for the
intended application.
2

Conventions in this document

2.1 Meaning of the warning notices
The following warnings are used in this document to alert the
user to potential dangers. The meanings of the warning
notices are defined as follows:
Warning Signal word
sign
WARNING
NOTICE
2.2 Typographic conventions
Text
Text that appears in bold designates labeling on
the device and the screen.
10
Classification of the warning
notice
Indicates a potentially hazard-
ous situation. If not avoided, it
could result in death or serious
injury.
Indicates a potentially hazard-
ous situation. If not avoided, it
could result in damage to the
product or environment.
► This triangle symbol in warning notices marks the
ways in which the danger can be avoided.
This symbol highlights information that makes it
easier to use the product.
3 Description
3.1 Product overview
(see fold-out page, illustrations A, B)
1 Headband assembly
2 Sweatband
3 Headband
4 Padding
5 Face shield sealing
6 Helmet
7 Mounting clips
8 Visor frame
9 Fastener buttons
10 Visor
3.2 Feature description
The face shield is connected to a breathing air supply via a
hose. The air from the breathing air supply is blown through
the air circulation system to the user's face. The resulting
overpressure prevents the penetration of ambient air that may
contain contaminants. Excess air can escape through the
sealing cuff of the facepiece.
3.3 Intended use
The face shield from the Dräger X-plore 8000 series can only
be used with powered air-purifying respirators from the
Dräger X-plore 8000 series or compressed air hose units from
the Dräger X-plore 9300 series.
The face shield protects the wearer from
– ambient air containing contaminants,
– solid and liquid particles,
– impacts.
3.4 Limitations on use
In ambient atmospheres with oxygen deficiency, the
facepieces can only be used in combination with a
compressed air hose unit, as they do not supply oxygen.
When used in combination with a powered air-purifying
respirator, the facepieces are not suitable for use in ambient
atmospheres with oxygen deficiency. Therefore, do not enter
unventilated containers, e.g. pits, ducts, etc. with the Dräger
X-plore 8000 facepieces and powered air-purifying
respirators!
Instructions for use |
Dräger X-plore 8000 Face Shield