Dräger X-plore 8000 Instrucciones De Uso página 11

The following factors can impair the protective effect of the
facepieces:
– High wind speeds and strong crosswinds.
– Earpiece or beards in the sealing cuff area.
3.5 Approvals
The Dräger X-plore 8000 face shield is approved according
to:
Standard
EN 166 (eye-guard)
Legend:
Meaning of the marking according to EN 166
1
BT
3
9
All parts comply with the requirements of the following
regulations:
– (EU) 2016/425
– Regulation 2016/425 on personal protective equipment,
as amended to apply in GB
For information on the respective system approvals, please
refer to the instructions for use of the respirators listed in
section 3.3.
Declarations of conformity: see www.draeger.com/product-
certificates
3.6 Explanation of type-identifying
marking and symbols
The name plate shown is an example. The specifications vary
depending on the facepiece.
Instructions for use |
Dräger X-plore 8000 Face Shield
Performance level/Marking
1 BT 9 3
Optical class
Protection against high-
speed particles at extreme
temperatures
Protection against liquid
droplets or splashes
Protection against melted
metal and hot solids
1
X-plore 8000 Face shield
2
3710810
3
4
EN 166:2001 1 BT 3 9
5
EN 12941:1998+A1:2003 +A2:2008 TH3
EN 14594:2018 Class 4A/3B
0158
SAI Global
AS/NZS 1716:2012
Lic No SMK1346
WARNING! THIS IS NOT AN INDUSTRIAL
SAFETY HELMET.
WARNING! THIS FACE SHIELD IS A
SECONDARY PROTECTION DEVICE.
USE WITH SAFETY GLASSES:
PLEASE DO NOT RAISE THE VISOR DURING
USAGE, FAILURE TO FOLLOW THIS
INSTRUCTION TO USE THIS PRODUCT MAY
SERIOUSLY AFFECTS THE USER'S HEALTH.
6
Size Range: 51-64cm (6 -8in.)
7
< 90% RH
www.draeger.com
8 Dräger Safety, 23560 Lübeck, Germany
Importer (UK): Draeger Safety UK Ltd, Blyth, UK
1 Product name
2 REF: part number
3 LOT: batch
4 Date of manufacture 9
5 Approval reference
Description
0086
+50°C
-30°C
Made in China
6 Size
7 Symbol "Pay attention to
instructions for use"
8 Distributor
Ambient conditions: mois-
ture
10 Ambient conditions: tem-
perature
| en
9
10
11