Removing The Dc Spd - SMA Sunny Tripower CORE2 Manual De Instrucciones

SMA Solar Technology AG
7

Removing the DC SPD

Damage to the inverter due to electrostatic discharge
Touching electronic components can cause damage to or destroy the inverter through
electrostatic discharge.
• Ground yourself before touching any component.
Procedure:
1. Unlock and remove the ribbon cable on the DC
SPD.
2. Disconnect all 24 cables from the DC SPD (PH2).
3. Remove the 4 fixing screws on the plate of the DC-
SPD (PH2).
4. Remove the cables of the DC SPD from the working area.
5. Remove the DC SPD from the inverter.
6. Ensure that none of the removed screws remain in the inverter.
☑ There are 24 M4 screws with spring washer and washer.
☑ There are 4 M5 screws with spring washer and washer.
Replacement Manual
NOTICE
STPxxx-60-DC-SPD-RM-xx-11
7 Removing the DC SPD
2
1
1
17