Fueling - Stihl TS 700 Cutquik Manual De Instrucciones

Ocultar thumbs Ver también para TS 700 Cutquik:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Fuel mix ages
Only mix sufficient fuel for a few days
work, not to exceed 3 months of storage.
Store in approved fuel-canisters only.
When mixing, pour oil into the canister
first, and then add gasoline. Close the
canister and shake it vigorously by hand
to ensure proper mixing of the oil with
the fuel.
Gaso-
Oil (STIHL 50:1 or
line
equivalent high-quality oils)
US gal.
US fl.oz
1
2.6
2 1/2
6.4
5
12.8
Dispose of empty mixing-oil canisters
only at authorized disposal locations.
TS 700, TS 800

Fueling

Before fueling, clean the filler cap and
the area around it so that dirt cannot fall
into the tank.
Thoroughly shake up the mixture in the
canister before fueling your machine.
To avoid the risk of burns or other
injuries due to escaping gasoline
vapors, open the filler cap carefully
so that any excess pressure in the
tank can escape slowly.
Never use a tool to open the
bayonet catch. This could damage
the cap and cause fuel to leak out.
Do not spill any fuel and do not fill the
tank up to the brim.
English / USA
Open the filler cap
:
Press the cap down with your hand
as far as possible, turn it
counterclockwise (approx. 1/8 turn)
and remove it.
Close the filler cap
:
Fit the cap and turn it until it
engages in the bayonet mount
:
Press the cap down with your hand
as far as possible and turn it
clockwise (approx. 1/8 turn) until it
engages completely
33

Publicidad

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

Ts 800 cutquik

Tabla de contenido