Safety Precautions And Working Techniques - Stihl TS 700 Cutquik Manual De Instrucciones

Safety Precautions and
Working Techniques
!
Warning!
The use of any cut-off
machine may be
hazardous. Because a
cut-off machine is a high-
speed, fast-cutting power tool, special
safety precautions must be observed to
reduce the risk of personal injury and
fire.
It is important that you read, fully
understand and observe the following
safety precautions and warnings.
Read the instruction
manual and the safety
precautions periodically.
Do not lend or rent your cut-off machine
without the instruction manual. Be sure
that anyone using your cut-off machine
understands the information contained
in this manual. A first-time operator
should obtain practical instruction before
using the machine. Employers should
establish a training program for
operators of gasoline-powered, hand-
held portable, cut-off machines to
assure safe operation of these
machines. These safety precautions
and warnings apply to the use of all
STIHL Cutquiks.
TS 700, TS 800
!
Warning!
Careless or improper use of any cut-off
machine may cause serious or fatal
injury.
Have your STIHL dealer show you how
to operate your cut-off machine.
Observe all applicable national, state
and local safety regulations, standards
and ordinances.
!
Warning!
Minors should never be allowed to use a
cut-off machine. Bystanders, especially
children, and animals should not be
allowed in the area where a cut-off
machine is in use. Never let the cut-off
machine run unattended.
Different models may have different
parts and controls. See the appropriate
section of your instruction manual for a
description of the controls and function
of the parts of your model cut-off
machine.
Safe use of a cut-off machine involves
– the operator
– the cut-off machine
– the use of the cut-off machine.
English / USA
THE OPERATOR
Physical Condition
You must be in good physical condition
and mental health and not under the
influence of any substance (drugs,
alcohol, etc.) which might impair vision,
dexterity or judgment. Do not operate a
cut-off machine when you are fatigued.
Be alert - if you get tired while operating
your cut-off machine, take a break;
tiredness may result in loss of control.
Working with any cut-off machine can be
strenuous. If you have any condition that
might be aggravated by strenuous work,
check with your doctor before operating
a cut-off machine.
3