Spark Arresting Screen In The Muffler - Stihl TS 700 Cutquik Manual De Instrucciones

Setting the idle speed
LA
Engine stops when idling
Set to standard setting!
: Turn the idle speed adjusting
screw (LA) clockwise until the
abrasive wheel begins to turn, then
turn it back 1 turn
Abrasive wheel runs when idling
Set to standard setting!
: Turn the idle speed adjusting
screw (LA) anticlockwise until the
abrasive wheel stops running,
then turn it another 1 turn in the
same direction.
Erratic idling behaviour, poor
acceleration
Idle speed setting is too lean (e.g. at low
ambient temperature):
Turn the low speed adjusting screw (L)
approx. 1/4 turn anticlockwise until the
engine runs and accelerates smoothly.
TS 700, TS 800
Idle speed cannot be increased
sufficiently via the idle speed
adjusting screw (LA), engine stops
when changing from part-load to idle
speed
: Turn low speed adjusting screw (L)
approx. 1/4 turn clockwise.
Correcting the carburetor setting
for use at high altitudes
The setting may have to be marginally
corrected if the engine performance is
unsatisfactory at high altitudes.
: Check the standard setting.
: Let the engine warm up.
: Set idle speed correctly.
: Turn the high speed adjusting
screw (H) clockwise (leaner).
The screws should only be adjusted
carefully and as little as possible. The
slightest adjustment produces a tangible
difference in engine behaviour.
If the setting is too lean, the
engine may be damaged by
overheating and a shortage of
lubricant.
English / USA
Spark arresting screen* in
the muffler
If engine performance deteriorates,
check the spark arresting screen in the
muffler.
Wait until engine has cooled
completely before performing the
following operations.
: Use a suitable tool to squeeze ends
of clip (1) together and then lift the
clip away.
: Remove the spark arresting
screen (2) from the muffler.
: Clean the soiled spark arresting
screen.
: If the screen is damaged or heavily
carbonized, fit a new one.
: Refit the spark arresting screen in
reverse order of steps.
* see "Guide to using this manual"
39