Publicidad
Idiomas disponibles
Idiomas disponibles
B
Water supply and drain
Cold water connection
• Connect the cold water supply hose to a threaded 3/4(inch) connector and make sure that
it is fastened tightly in place.
• If the water pipes are new or have not been used for an extended period of time, let the
water run to make sure that the water is clear.
• This precaution is needed to avoid the risk of the water inlet to be blocked and damage the
appliance.
About the safety supply hose
• The safety supply hose consists of the double walls. The system guarantees its intervention
by blocking the flow of water in case of the supply hose breaking and when the air space
between the supply hose itself and the outer corrugated hose is full of water.
WARNING
A hose that attaches to tap can burst if it is installed on the
same water line as the dishwasher. If your sink has one,
it is recommended that the hose be disconnected and the
hole plugged.
Using the appliance
ordinary supply hose
safety supply hose
9
EN
Publicidad
