Descargar Imprimir esta página

VALBERG 6S49 F S929 C 2 Instrucciones De Uso página 41

Publicidad

Idiomas disponibles

Idiomas disponibles

C
Troubleshooting tips
Before calling for service
Reviewing the charts on the following pages may save you from calling for service
Problem
Dishwasher doesn't start
Water not pumped from
dishwasher
Useful inf
Possible causes
Fuse blown, or the circuit
breaker tripped.
Power supply is not turned
on.
Door of dishwasher not
properly closed.
Kink in drain hose
Filter clogged.
Kitchen sink clogged.
35
• Replace fuse or reset
circuit breaker.
• Remove any other
appliances sharing the
same circuit with the
dishwasher.
• Make sure the dishwasher
is turned on and the door is
closed securely.
• Make sure the power cord
is properly plugged into the
wall socket.
• Make sure to close the
door property and latch it.
• Check drain hose.
• Check the coarse filter.
(see section titled «Internal
Care»)
• Check the kitchen sink
to make sure it is draining
well. If the problem is
the kitchen sink that is
not draining, you may
need a plumber rather
than a serviceman for
dishwashers.
EN
Solution

Publicidad

loading

Este manual también es adecuado para:

6s49 f w929c 2977635977634