Metz SCA 3083-M2 digital Manual De Instrucciones página 20

The Metz remote flash mode does not support any
special flash modes such as Nikon-3D flash mode,
Canon E-TTL flash mode, Canon A-TTL flash mode
or high-speed synchronisation (FP or HSS flash
mode). If necessary, special flash modes must be
cancelled or switched off on the controller, SCA
adapter or camera (see the respective operating
instructions).
The mecablitz 44 MZ-2 only supports the
"Ad1" remote channel.
8.2 Metz remote flash modes
8.2.1 Metz TTL remote flash mode
In the Metz TTL remote flash mode, the controller
operates with a TTL-capable camera and a suitable
SCA adapter. This mode permits joint TTL flash
control of suitable slave flash units without any
connecting cables. The slave flash units are fitted
with the SCA 3083 digital slave adapter.
The TTL sensor integrated in the camera controls
through-the-lens (TTL) the light emission of the
controller and slaves in TTL mode. When several
slaves are involved, then the light control covers all
flash units within the remote set-up.
8.2.2 Metz automatic remote flash mode
The controller in the Metz automatic remote flash
mode operates with a suitable SCA adapter or with
the 301 standard foot. This mode permits joint
automatic flash control of several suitable slaves
without any connecting cables. The slave flash
units are fitted with the SCA 3083 digital slave
adapter.
20